Point Lighting

Point Lighting Corporation manufactures the full range of aviation obstruction LED lighting including low, medium & high intensity. Red, white & dual red-white lights & beacons including “double” primary-standby beacons. Approved standards include: FAA, ICAO, Transport Canada, CSA, UK CAA, CAP 437, ABS, UL hazardous area, ATEX & IECEx hazardous area. Standard and custom controllers including solar powered and battery backup systems. We are pleased to have Point Lighting as a valued business partner here at Source IEx. Take a look at some of the innovative solutions available below.

Point Circle-H Lights PTPS LED

Point Lighting has developed a fully compliant PTPS LED Helideck lighting system that is compliant with the latest version of CAP437 Ed. 8 as well as carrying Ex certifications including ATEX, IECEx, Class 1 Division 2, Class 1 Zone 2 and is listed to UL 844, 1598, 1598A (Marine Vessels) and also carries approvals to CSA C22.2 No. 137 and ABS Type approvals. The PTPS system also has the exclusive Point Lighting Marine Treatment (MT) finish for use in all marine, high salt content air and other corrosive environments. Also certified and tested to IP66/67. All systems are manufactured here in the USA!

To download the Point Lighting PTPS Lighting System catalog, please click here

Point Status Lights PSL LED Helideck Status Light

The Point Status LED Helideck light is certified to the latest CAP 437 Ed 8 requirements and is listed for use in Class 1 Division 2 and Class 1 Zone 2 hazardous locations. Also approved by ABS. The Status Light system consists of one or two PFB flashing red LED main status lights visible from any direction of approach and on any landing heading. Additional PRL-LSM repeater lights may be placed at the helideck. If a condition exists on an installation which may be hazardous for the helicopter or its occupants a visual warning system should be installed. The meaning of the flashing red light is either Do not land, aerodrome not available for landing or Move clear of landing area. The system may be automatically initiated by means of a remote alarm signal (by others) as well as manual activation.

To download the Point Status PSL LED Helideck Status Light catalog, please click here

Point Surface PSF-AX Marine Helideck Floodlight

The Point PSF-AX Floodlight is a medium intensity LED surface mount helipad and helideck floodlight intended to 'wash' the pad with light. The purpose of the PSF-AX is to provide cones of light washing the helideck surface that improves conspicuity and depth perception to the pilot. Available in different voltages, the PSF-AX is Class 1 Division 2 and also carries ATEX/IECEx approvals for Zone 1 and additional approvals to CAP 437, ICAO and ABS Type status. Marine treated copper free aluminum with 316SS hardware for maximum corrosion resistance.

To download the PSF-AX Marine Helideck Floodlight catalog, please click here

Point Helideck Lights PRL-AX-LSM LED Surface Perimeter Light

The Point PRL-AX-LSM is a low profile 8-inch diameter surface mounted perimeter LED Light available in multiple voltages and colors for most all helideck lighting applications. Available in ATEX/IECEx Zone 1 or Class 1 Division 2, the PRL also carries approvals to the latest CAP 437 Ed 8 requirements as well as the ICAO Annex 14 requirements. Copper Free aluminum housing with 316SS hardware, the LED's are rated for 100,000 hours and carries an IP66/67 rating. ABS and FAA approved.

To download the PRL-AX-LSM Perimeter Light catalog, please click here

Point Wind Cone

Point Lighting offers a Class 1 Division 2/Zone 2/ATEX/IECEx Zone 1 wind cone that provides a visual indication of wind direction at airports and heliports. The Point Wind Cones are installed worldwide on offshore helidecks, heliports, hospitals, corporate headquarters and military bases. The windsocks carry FAA, ICAO, CAP 437, Transport Canada and ABS approvals and are listed for hazardous locations as well.

To download the Point Wind Cone PWC series catalog, please click here

Point Heliport PHC Lighting Controller

The PHC controller provides manual and automatic operation of the heliport lighting position. In the AUTO position, the controller operates automatically from a pilot actuated FAA radio controller or an FAA photoelectric controller that activates per FAA light level requirements. Available in many different custom configurations, the PHC series are available for both safe area and hazardous area applications.

To download the Point Heliport PHC Lighting controller catalog, please click here